BUILDING QUALITY VW ENGINES FOR OVER 25 YEARS
UPGRADE OPTIONS
Lightened Flywheel - $95 + exchange
Case (Reconditioned) - $300
(New) - $500
Crank (Classic) - $150
(Aftermarket foreign econo) - $150
(Aftermarket US high performance) - $450
Cams & Lifters (under 5500 rpm) - $125
(over 5500 rpm) w/ dual springs - $225
Heads (Big valve option) - $250
(Port & Polish) - $350
Case (Reconditioned) - $300
(New) - $500
Crank (Classic) - $150
(Aftermarket foreign econo) - $150
(Aftermarket US high performance) - $450
Cams & Lifters (under 5500 rpm) - $125
(over 5500 rpm) w/ dual springs - $225
Heads (Big valve option) - $250
(Port & Polish) - $350
CONTACT US
OTHER SERVICES
HEAD
-NEW Type I, II, III, IV, WB (inquire for price)
-Bore to larger cylinders or deck $75
-Service big valve heads (each) $90
-machining for high compression $60
-Replace valve guides (each guide) $8
-Three angle valve job $95
-Port & Polishing for mini-d, round, or oval $250
-Type 1-3 rebuild Inquire for price
-Type 4 & water boxer rebuild $230 + exch.
-Install big valves (parts & labor) $180
*All prices are per head unless otherwise stated
CASE
-Bore to larger cylinder or deck $75
-Type 4and water boxer line bore $95
-Case savers (10mm or 8mm w/deck) $95
-Sand seal (seal not included) $40
-Shuffle pins (.002 chrush fit) $95
-Clearnce for 84 mm crank $75
-5/8 Oil check relief $75
-NEW: KIT FOR PROPER OIL PRESSURE $150
-Welded gussets and #3 area $180
-Full flow w/ brass fittings $45
-Welded full flow $95
DINO TEST $175
DINO TEST W/ JETTING $250
-NEW Type I, II, III, IV, WB (inquire for price)
-Bore to larger cylinders or deck $75
-Service big valve heads (each) $90
-machining for high compression $60
-Replace valve guides (each guide) $8
-Three angle valve job $95
-Port & Polishing for mini-d, round, or oval $250
-Type 1-3 rebuild Inquire for price
-Type 4 & water boxer rebuild $230 + exch.
-Install big valves (parts & labor) $180
*All prices are per head unless otherwise stated
-Bore to larger cylinder or deck $75
-Type 4and water boxer line bore $95
-Case savers (10mm or 8mm w/deck) $95
-Sand seal (seal not included) $40
-Shuffle pins (.002 chrush fit) $95
-Clearnce for 84 mm crank $75
-5/8 Oil check relief $75
-NEW: KIT FOR PROPER OIL PRESSURE $150
-Welded gussets and #3 area $180
-Full flow w/ brass fittings $45
-Welded full flow $95
DINO TEST $175
DINO TEST W/ JETTING $250
All STOCK longblocks come with: NEW heads, piston cylinders, bearings, seals, lifters and oil pump. RECONDITIONED crank, cam, rods and flywheel. Also a 12 MONTH UNLIMITED MILE WARRANTY.
TYPE I, II, III LONGBLOCKS
STARTING AT
STOCK 1600cc - $1095 + core
STOCK 1641cc - $1195 + core
STOCK 1776cc - $1350 + core
STOCK 1835cc - $1350 + core
STOCK 1915cc - $1350 + core
Upgrades options can be made at extra cost. These prices can be found to the right.
SHIPPING AVAILABLE
DELIVERY AVAILABLE $.50/MILE (ROUND TRIP)
TYPE I, II, III LONGBLOCKS
STARTING AT
STOCK 1600cc - $1095 + core
STOCK 1641cc - $1195 + core
STOCK 1776cc - $1350 + core
STOCK 1835cc - $1350 + core
STOCK 1915cc - $1350 + core
Upgrades options can be made at extra cost. These prices can be found to the right.
SHIPPING AVAILABLE
DELIVERY AVAILABLE $.50/MILE (ROUND TRIP)
TYPE IV & WATERBOXER
LONGBLOCKS
STOCK setup with REBUILT heads
STARTING AT $2000 + core
STOCK setup with NEW heads
STARTING AT $2500 + core
Upgrade options can be made at extra cost. These prices can be found at the upper right.
SHIPPING AVAILABLE
DELIVERY AVAILABLE $.50/MILE (ROUND TRIP)
PORSCHE 914 ENGINES AVAILABLE
Contact for quote
TURNKEY ENGINES AVAILABLE
Type 1 starting at $3300
Contact for quote